Pa, radi već nekoliko sati bez gašenja. Ideju sam uzeo sa ovog sajta:
http://www.repairfaq.org/sam/tvfaq.htm#tvsddpwcc
Savet glasi ovako:
No picture/dark picture/erratic picture
If everything else works - there is sound and high voltage (static on the screen) - but there is no picture (including no on-screen menus), this limits the likely area of problems is the video output circuitry or CRT filament connections. Check to see if the CRT filaments are glowing. If they are not glowing, check for bad soldering on the CRT neck board and around the flyback transformer.
Where the picture is erratic - coming and going entirely or changing brightness suddenly, with power off, remove the picture tube socket (carefully!) and clean the pins with fine sandpaper and use contact cleaner on the socket. This source of bad connections can result in a variety of erratic symptoms. Check for bad solder connections on the CRT neck board.
i spectrum je kompjuter...